Application

Clean all oil & dirt from wall. Let dry completely. Tape your graphic at each corner. Measure side to side to center it on the wall. Now measure up and down on each side to level it. Place a long piece of tape down the center and remove one corner tape and peel back one side of the outer application tape with the letters on it being careful that letters adhere to the application tape. Do this slowly and watch that the letters are lifted. Cut the paper backing off this side and remove. Fold back over and hold letters slightly away from the wall. You may need two people to do this. Rub the letters on the wall starting from the center out. Now remove all other tape. Peel back other side of application tape with letters on it, again being careful to lift letters with application tape. Rub letters on wall and remove the application tape very slowely. Do this while watching that no letters or edges are being lifted from the wall with covering tape. Stop and rub them back on from the front if they begin to lift, then resume peeling.

« Back to Ideas Page